Cutting a PrintShot Pattern

Once all Register Markers are acceptable, click the Plot button or press F10 to cut the pattern. This will send the job to the cutting machine. From the machine, you can start the cutting job.

Cutting On a Conveyor Table

When PrintShot cuts pattern that is longer than the table length, PrintShot will split the pattern into frames lengths that can be cut and conveyed. The machine will capture and cut the first frame and then convey the pattern down the table and take another picture. The machine will repeat this process until the whole pattern is cut.

If PrintShot can’t detect all the Register Markers after the machine conveys the pattern down and takes a picture, the Editor Window will appear. You will then have to manually add the Register Marker and continue the job.